Primary Impactor
SRIRAM PRIMARY IMPACTOR is designed for crushing medium Hard to low abrasive with a high reduction ratio.
This consists of a well-balanced Rotor assembly supported on two heavy-duty roller bearing housings.
Crushing takes place in between rotary Breaker bars and stationary breaker plates. The final output product size is determined by adjusting the clearance between the Rotor bar and breaker plates.
Application Fields
Coal
Minerals
Construction material
Chemicals
Boiler bed material
Spices
Special Features
Balanced Rotor assembly
Wear resistant inner Parts
Heavy Duty Steel Construction
Easy maintenance and minimum service
Higher Output and low Power Consumption
High reduction ratio
Technical Specifications
Model | Size of Crusher | Power H.P Reqd. |
Max Feed Size |
Approximate Production in Tons/Hour with Jaw setting | |||||
---|---|---|---|---|---|---|---|---|---|
mm | inches | 1/4" | 3/4" | 1" | 1.5" | 2" | |||
SJC-6 | 250 X 150 | 10" X 6" | 7.5 HP | 3" | 1.0 | 2 | 3.5 | 4.5 | __ |
SJC-7 | 300 X 175 | 12" X 7" | 10 HP | 6" | 2.5 | 6 | 9 | 12 | 18 |
SJC-9 | 400 X 125 | 16" X 9" | 10-15 HP | 8" | __ | 10 | 13 | 15 | __ |
SJC-12 | 600 X 300 | 24" X 12" | 20 HP | 10" | __ | 14 | 17 | 18 | __ |
* These are representative capacities only and subject to change. This should be used as guide only.